How big is the current
Electric current / Electric current I
The electric current or strength of electric current is simply called current. This describes the transfer of electrical energy and the numerical movement of free charge carriers. Charge carriers can be electrons or ions.
An electric current can only flow if there are enough free and mobile charge carriers between two different electric charges. For example in a conductive material such as metal, liquid and gas.
- Direct current
- Alternating current
- Eddy current
Current flow in comparison
The flow of electricity is often compared to running water in a pipe. The more the water flows through the pipe, the higher the amount of water. It is the same with electricity. The more electrons that flow through the conductor in one second, the greater the electrical current.
The electrical current strength is used to numerically describe the electrical current.
1000 A = 1 kA (kiloamps)
100 A (ampere)
10 A (ampere)
1 A (ampere)
0.1 A = 100 mA (milliamps)
0.01 A = 10 mA (milliamps)
0.001 A = 1 mA (milliamps)
0.0001 A = 100 µA (microamps)
The legal basic unit of electrical current is 1 ampere (A). The current values in electronics are normally between a few microamps (µA) and several amps (A). In heavy current engineering, one also knows kiloampere (not specified).
I: Electric Current
i: instantaneous value of an alternating current
î: peak value of an alternating current
I.TOTAL : Total current
I.R1 : Current through resistor R1
The symbol of the electric current or the electric current strength is the capital "I". Deviating from this, there are different spellings in upper and lower case with additional symbols that have a specific meaning. A number or letters as an index identify a specific current in a circuit.
There are various formulas for calculating the electrical current.
The current direction is indicated in circuits with an arrow. Due to different scientific assumptions and findings, two current directions are defined.
- The technical current direction (historical current direction) runs from plus (+) to minus (-).
- The physical flow direction (flow direction of the electrons) runs from minus (-) to plus (+).
- The current is shown in circuits with a (red) arrow in the technical direction of the current.
Technical direction of current (historical direction of current): From plus to minus
Before we knew the processes in atoms and the relationship between electrons, it was assumed that positive charge carriers were responsible for the flow of electricity in metals. Accordingly, the current should flow from the positive pole to the negative pole. The use of a measuring device to measure current also allows this conclusion. Although the assumption at that time was refuted, the original (historical) direction of the current was retained for practical reasons. That is why the current direction within a circuit is still defined from plus to minus today.
Physical flow direction (electron flow direction): From minus to plus
In a closed circuit, free charge carriers (electrons) are repelled from the negative pole and attracted to the positive pole. This creates a flow of electrons from the negative pole to the positive pole. This current direction is the physical current direction, which is also called the electron current direction. It corresponds to the actual flow direction of free charge carriers.
Measure the electric current
The ammeter is always connected in series with the consumer. To do this, the line of the circuit must be disconnected in order to be able to insert the measuring device into the circuit. During the measurement, the current must flow through the measuring device.
Electricity in electronics
Other related topics:
Electronics simple and easy to understand
The electronics primer is a book about the basics of electronics, components, circuit technology and digital technology.
I want that!
Experience electronics with the "Starter Edition" electronics set
Perfect for beginners and newcomers
- Entry into electronics without prior knowledge
- Quick understanding of components and circuit symbols
- Experiment without a soldering iron: just insert components
More information Order the electronics set now
- What skills are required for growth hacking
- How do you pronounce the name Aiden
- Who will win the IPL 2018 SRH
- What are the worst places in Bangalore
- Is there a fairy tale novel for beginners
- How was Dropbox created
- From 2015, which countries will regulate drones
- Periods after kissing can be delayed
- Why narcissists have children with different women
- Who came along with Buddha
- What are manual information systems
- How do you learn wrestling
- How many brand classes are there
- The scientific method could be improved
- What's your super happy song
- Can social networks be real communities?
- Does prayer really work in hopeless situations?
- Can I learn to hack through Windows 10?
- What's Vivo's next cell phone
- What is the formula of sunlight
- What do I mean by that
- What is RF power
- What are the limitations of the MOS transistor
- Orgasm does not increase testosterone